** (FOR BEST RESULTS PLEASE INSTALL THE SOFTWARE FROM THE CD FIRST BEFORE  CONNECTING THE SCANNER TO YOUR COMPUTER) **

Note:   As a precaution, a RED warning label has been placed over the computer end of the USB plug to remind you to install the software CD first. Remove this warning label prior to using the USB cable.

Install Scanner Driver Software

a)  Insert the installation CD into your CD-ROM drive.

b) The installation program will begin automatically.

c)  Select “Install Scanner Driver” option and follow the installation instruction.

Fig. 1                                                                                                           

Fig. 2

d) If your CD does not start automatically then double click the MY COMPUTER icon on your Windows desktop, then double-click the CD-ROM drive icon.

You can also manually start the installation by double-click the SETUP.exe icon located in the Driver folder on the CD.

Fig. 3                                                                                                                    

Fig. 4

e)  Check the EULA accept box then click “Next” (Fig. 3) above.

f)   The Choose Setup Type window shows two choices of installations, select the “Complete” button and allow the full installation (Fig. 4) above.

g)  During the installation the Windows Logo screen will appear stating that the software is not Windows certified.

h) We assure you that our software driver has been fully tested to function properly under Windows environment, select the “Continue Anyway” button to proceed with the installation (Fig. 5).

Fig. 5                                                                                                           

Fig.6

i)   You will be redirected back to the main menu at the end of the installation.

j)  You can either install PageManager7 or Adobe Reader 8.1 application now or later.

Note: After you have completed all your software installations, we recommend that you restart your computer  even though you are not requested by Windows to do so.

Uninstall Scanner Driver Software

a)  If you should need to un-install the scanner driver, you can do so from Add or Remove Programs.

b) Go to: START / Control Panel / Add or Remove Programs.

c)  From the list of Currently Installed Programs select your scanner model “DocketPORT 487”. d) Select the Remove button and your driver will be removed from your system.

e)  It is important that the scanner is connected to your computer when performing this function.

f)  You can also uninstall your PageManger7 or Adobe Reader 8 applications from here.

Install Scanner hardware

a)    Connect the USB cable (provided) to your computer and scanner. (Fig. 1)

b)    Make sure the red warning label is removed before connecting this end to your computer.

c)    You may need to reconnect the cable to another USB port on your computer if the scanner cannot be detected. (Check your computer’s user guide to identify other available USB ports and their locations.

Fig. 1

Fig. 2                                                                                                                            

Fig. 3